Hiring A Licensed Plumber

Large plumbing projects usually require hiring a licensed plumber to get the job done right and legally. If you have never hired a plumber before you may be wondering how to go about getting it right the first time. Fortunately, hiring a licensed plumber doesn’t have to be difficult as long as you take your time and do a little homework.

Every state in the U.S. has a Contractors Board that is in charge of overseeing the licensing of all contractors including plumbers. State Contractors Boards were established for the safety, health and welfare of the public. They are an excellent resource to use when hiring a licensed plumber. Before you begin any job that requires a permit, for your own safety, it is highly recommended that you make sure your contractor is a licensed contractor. Often, you can look up the license status online in minutes.

Posted in Calling a Plumber

Repair A Leaking Freeze-Proof Faucet

A freeze-proof faucet is a great outdoor plumbing fixture. Having a freeze-proof faucet will allow you to have water outside the house even in the winter. A freeze-proof faucet does well in cold temperatures because the main water line that supplies it is up to 12” away from the spigot inside the insulated wall or under the insulated house. When the spigot is turned off the water is stopped in the far end of the pipe where it is insulated so there is less chance of it freezing and bursting the pipe.

Like everything else a freeze-proof faucet will eventually wear out and will need to be rebuilt or replaced. Most likely a problem with the faucet will become apparent after the winter when you go to turn the faucet on and it leaks. The freeze-proof faucet can leak from several different areas. The source of the leak will determine the type of repair that is needed.

The freeze-proof faucet can leak from around the handle stem. If this is the source of the leak when you turn the handle to open the spigot water will tend to pool out from around the handle. To hire a licensed plumber visit Ocala plumber to protects you in various ways. Being licensed means that the contractor has liability insurance so you are covered if any damage is caused to your property.

The freeze-proof faucet can leak from around the handle stem. If this is the source of the leak when you turn the handle to open the spigot water will tend to pool out from around the handle. This type of leak can usually be fixed by tightening the packing nut. To do this remove the screw that holds the handle in place and take the handle off. This will give you access to the packing nut. Tighten it, replace the handle, and test for a leak. If this does not work you can replace the packing with either new packing or a faucet rebuild kit which will have new packing.

Posted in Leakage Problems

List of Plumbing Tools

Having the proper tools for each plumbing project can help insure that everything goes smoothly. If you want to save the money by not calling a plumber you may have to break down and buy a few tools. There are some basic plumbing tools that most homeowners will find useful and then there is a more comprehensive list of plumbing tools for the dedicated do-it-yourself. This list of plumbing tools may take some time to accumulate but if you do many repairs and renovation projects they will come in very handy.

Faucet Handle Puller
To repair washers in a faucet the first step after shutting the water off is to remove the handle. Sometimes the handle will be stubborn and refuse to come off without a fight. This is where a good faucet handle puller will come into play. Using a handle puller can help to safely remove a handle without damage. To use a handle puller first you must remove the screw holding the stem in place. Then turn the handle puller up until it clears the handle with the tip going into the screw hole. Hold onto the grip bars while turning the threader system down into the screw hole until the handle is free.  Visit windows Florida for more plumbing tools.

Any plumber would tell you that a wrench is your best friend when it comes to plumbing jobs. Indeed, a wrench is the most basic tool that any plumber should have. It can be quite confusing to select which wrench to purchase with all the different kinds of options available to you. Wrenches can differ according to their type and brand. There are adjustable wrenches, socket wrenches, pipe wrenches, and basin wrenches. In taking care of your wrenches, it also helps to check its parts from time to time. If you need to replace a certain part, then you might want to check Ridgid parts for wrenches if you are after quality tool parts.

Pliers and vise grips are also among the most basic plumbing tools. Pliers are often included in plumbing tool shopping lists because they are often needed in plumbing work. Pliers also come in different types like groove pliers and water pump pliers. Vise grips or pipe vises are typically used in cutting, threading, and reaming pipes. The most commonly used pipe vises are the yoke pipe and chain vise.

Posted in Plumbing Tools